Services

GALVANIZATION

METAL SURFACE CLEANER PROCESS

FILTER PARTS OF AIR AND WATER

1. Acidic zinc plating line with three kind of passivations . The thickness of zinc is up to 30 micron .the
line is automatic one and work with barrel and panels too.
2.The nickel – chrome  device
3. Flake zinc  for new line
4. The line for cataphorese

1. Shot blasting
2. Send blasting ( sand blasting )
3. SIFT ( vibratory mass finishing media )
4. De oil
5. Ultrasound Detail Cleaning ( ultrasonic cleaning )
6. Electrostatic powder coating
7. Temper according to the required standards
8. (chemical etching).Marking the metallic surface

For the water

1. Industrial filters with large capacity, unlimited water quantity. Here, sand filters,  activated carbon,  de nitrifying filters with strong anion resin.

  1.  self-cleaning filters
  2. selective colonna filters
  3. micro filtrations with Dizzer microfiltrate membrane,from  Germany, where we are representative of this kind of membrane
  4. Industrial filters with reverse  osmosis Best membranes
  5. Water analysis

For the air

  1. The wet scrubber acid gases, and everything else in the.air The  contaminated  air passes through the aspirator in the scrubber’s body, passes the packed  media let impurities there,  and  became clear  at the end. A flow of water drops from the top . as rain and clean packed  media. this water can be cleaned and re used .
  2. Wet scrubbers are produced both vertical and horizontal